Product: Thermogroup 7 Round Heated Ladder Towel Rail

Dimensions: 600mm (W) x 800mm (H) x 122mm (D)
Colour: Brushed Stainless Steel

Heated Towel Rails are an affordable luxury for every bathroom for warming and drying your towels. The SRB4412 Heated Towel Rail is a 600x800 7-bar brushed stainless steel ladder rail. The brushed stainless finish is very similar to a brushed nickel finish and can be used to compliment your brushed nickel tapware.

The SRB4412 electric towel dryer is a 12v unit, this means that it can be installed close to a wet area in the bathroom. The rail comes supplied with a transformer which reduces the incoming voltage from 240v to 12v. The rail will still operate at the same temperature and use the same amount of electricity as an equivalent 240v rail as the wattage is the same, however, the rail is operating at a lower voltage.

The rail has a wiring point on both the left and right-hand sides of the rail and can be wired at either the top or bottom of the rail. As it is a 12v unit and needs to be wired to a transformer the rail can only be hardwired.

The electric towel rail is designed to rapidly heat up and reach a temperature of around 45-55 degrees. The rail can be operated using an on/off switch however we recommend using a timer to allow you to set and forget and control your running costs. As the rail is electric it is very energy efficient and can cost as little as $1 a week to run.

What’s in the box

Thermogroup 7 Round Heated Ladder Towel Rail
Fixing Kit

Technical Data

Output	90Watts
IP Rating	IP55
Lead Length	1.5m
Number of bars	7
Voltage	12Volts
Wiring type	Concealed (Hardwired)
Wiring Position	Any of the four mounting positions
Distance Between Mounting Points (Top to Bottom)	600mm
Distance Between Mounting Points (Left to Right)	568mm

PLEASE NOTE: Specifications are for information purposes only. Whilst every effort has been made to ensure the product specifications are accurate, due to continuing product development and improvement the specifications are subject to change. Specifications can be used to rough in and fit timber supports in the wall however we recommend no holes are drilled without having the product on-site or verifying the details with the manufacturer. Thermogroup cannot be held liable or responsible for errors due to updated specifications

Warranty

Thermogroup accessories are covered by 10 years replacement on products or parts*

Heated Towel Rails and Ladders:

Polished Stainless Steel: 10 Year Warranty
Brushed Stainless Steel: 7 Year Warranty
Matte Black: 7 Year Warranty
Made to Order Finishes: 5 Year Warranty

SHOPPING CART

BIGGEST EOFY SALE | USE CODE: EOFY26 AT THE CHECKOUT

DAYS

HRS

MINS

SECS

Brushed Nickel Heated Towel Rail

Rated "Excellent" By Our Customers