Thermogroup 7 Bar Straight Square Ladder Heated Towel Rail - Brushed Stainless Steel

• Fits 2 towels on 7 heated bars
• Brushed Stainless Steel finish to sit with brushed stainless steel tapware and accessories
• Multiflex wiring: power can connect at any leg, left or right, top or bottom
• Hardwire or plug in: suits new builds and renovations
• Heats to about 45–55°C: warm to the touch, not too hot to handle
• Low running cost: 83W, about $0.77 a week at 4 hours a day
• IP55 rated for bathroom use
• Thermogroup warranty: 7 years
• Add a timer above so it switches on before your shower and off when you forget

Dimensions: 600mm (W) x 800mm (H) x 120mm (D)  
Colour: Brushed Stainless

Heated Towel Rails are an affordable luxury for every bathroom for warming and drying your towels. The SSB44M Heated Towel Rail is a 600x800 7 bar rail ideally sized to fit two towels. The brushed stainless finish is very similar to a brushed nickel finish and can be used to compliment your brushed nickel tapware.

The SSB44M towel heater features multiflex wiring. This means that you have a connection point on the right or left-hand side of the rail, this would be typically at the bottom but the rail can be flipped so that it is at the top and provides the option of hardwired or plugin, all as standard out of the box.

The electric towel rail is designed to rapidly heat up and reach a temperature of around 45-55 degrees. The rail can be operated using an on/off switch however we recommend using a timer to allow you to set and forget and control your running costs. As the rail is electric it is very energy efficient and can cost as little as a $1 a week to run. 

Specs are from Thermogroup and are for guidance only. Confirm mounting points with the rail on site before drilling.

• Thermogroup 7 Bar Straight Square Ladder Heated Towel Rail

Installation

• Plug-in (exposed) install: you can do it yourself using the supplied lead and a nearby power point.
• Hardwired (concealed) install must be done by a licensed electrician.
• Fix into studs or timber noggins. Use the mounting points in Specifications to set them at rough-in.
• Wiring it through a timer is recommended.

Care

• Wipe with a soft damp cloth and dry. Mild soapy water only.
• Avoid abrasive pads, bleach and acidic cleaners, which can mark the finish.

Thermogroup is a proud family-owned business with a strong commitment to quality, innovation and comfort. Since its humble beginnings in 2003, the company has grown into one of the most respected brands in the industry.

Driven by the belief that warmth and comfort should be simple, affordable and stylish, Thermogroup offers innovative product solutions designed to enhance everyday living. Combining modern design with practical functionality, its products bring effortless luxury, lasting comfort and peace of mind to every home.

• SSB44M Specification Sheet (PDF)
• Installation Guide (PDF)
• Thermogroup Warranty Information (PDF)

How much does it cost to run?
It draws 83W. At 4 hours a day and 33c/kWh that is about $0.77 a week. A timer keeps it to the hours you need.

Do I need an electrician?
Only for a hardwired install. The plug-in option just needs a nearby power point.

Can I use it with a timer?
Yes. Pick one above. A timer heats your towels before you shower and switches the rail off automatically.

How hot does it get?
About 45–55°C: warm enough to dry towels, not too hot to touch.